E-UC2843BD1013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 450kHz |
| Base Part Number | UC2843 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.05V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
E-UC2843BD1013TR Overview
With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). 7.6V~30V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -25°C~85°C TA is the -25°C~85°C TArm. Using this switching controller, it is possible to switch at Up to 500kHz. dc dc regulators can be carried out with Surface Mount. Frequency Control provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 15V. Search for "UC2843" to find other relevant dc to dc converter ics. 8 pins are on switching converter. The test statistics indicate that DC regulator outputs a voltage of 5.05V. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is 450kHz frequency setting on the switching controller. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 30V.
E-UC2843BD1013TR Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 450kHz
E-UC2843BD1013TR Applications
There are a lot of STMicroelectronics E-UC2843BD1013TR DC to DC converter applications.
- Smart grid
- Imported equipment
- Mobile phones
- Post equipment
- Computed tomography (CT)
- Digital display device
- Medical equipment
- Sensitive electronic devices
- CMM
- Terrestrial set-top boxes
