E3FA-DP22
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 300 |
| Number of Pins | 4 |
| Housing Material | ABS |
| Operating Temperature | -25°C~55°C |
| Published | 2012 |
| Series | E3FA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Connector |
| Connector Type | Connector |
| Max Operating Temperature | 55°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67, IP69K |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 500μs |
| Adjustment Type | Single-Turn |
| Sensing Distance | 11.811 (300mm) |
| Sensing Method | Reflective |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3FA-DP22 Overview
It is recommended to set the temperature of a photoelectric sensor to -25°C~55°C in order to ensure reliable operation. It is necessary to provide these electronic components with a voltage of 0 to make them work in a circuit or system. A photoelectric sensor should have a response time of 500μs. It is essential that the photoelectric sensor operates at a minimum working temperature of -25°C to guarantee its reliability. It is possible to operate on a reliable level at a temperature of 55°C. 4 pins must be connected to the photoelectric sensor to make it work. Photoelectric sensors are designed to operate with a current of 100mA at the output. A photoelectric sensor can be operated at a maximum voltage of 30V in a DC circuit without damage occurring. There is no limit to the voltage at which this photoelectric sensor can work, including zero. As a convenience, here are some photoelectric sensors included in the 300 package.
E3FA-DP22 Features
Sensing Distance: 11.811 (300mm)
4 pins
Response Time: 500μs
Operating Temperature: -25°C~55°C
Available in 300 package
E3FA Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
E3FA-DP22 Applications
There are a lot of Omron Automation and Safety E3FA-DP22 Photoelectric Sensors applications.
- Contrast sensors
- Passive infrared sensors
- Measuring distance
- Zone scanners
- Luminescence sensors
- Entrance and gate
- Monitoring bigger areas for objects with light grids
- Material handling
- Logistics and materials handling
- Pharmaceutical industry
