FAN5402UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, WLCSP |
| Number of Pins | 20 |
| Weight | 73mg |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FAN5402 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.8V |
| Max Output Current | 1.25A |
| Power Supplies | 5V |
| Interface | I2C, USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Max Output Voltage | 4.4V |
| Max Input Voltage | 20V |
| Supply Current-Max (Isup) | 0.09mA |
| Min Output Voltage | 3.5V |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.5V Max |
| Height | 378μm |
| Length | 1.96mm |
| Width | 1.87mm |
| RoHS Status | RoHS Compliant |
FAN5402UCX Overview
If you are looking for it in the Tape & Reel (TR) package, then you have found it.To make it easier for you, it is included with the 20-UFBGA, WLCSP package.Surface Mount is the mounting type of the device.It is best to set the temperature to -30°C~85°C TA in order to prevent the system from overheating.A analog IC of ANALOG CIRCUIT has been used in the design of this device.Charge the device by providing it with Constant - Programmable current.Parts related to the base part number FAN5402 can be found based on that number.Taking it as a whole, it has been concluded that there are 20 terminations to be found.For the battery pack, it is set to 4.5V Max.Current, Timer, Voltage, for example, can be programmed.The product is able to function with the help of 20 pins that are required.In order to run it, you would need a battery with 5V.To ensure the device works properly, the supply voltage should not exceed 6V.The efficiency of the system can be maximized if the output voltage is 1.8V.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A power supply voltage as low as 4V can be used for it and it will work as well as possible.In order to mount it, it has to align itself with Surface Mount.Vsup (maximum supply voltage) is set to 0.09mA.The power supply for this part is set to 5V.Input voltage is limited to 20V volts.It is important to note that the maximum output supply voltage for this operation must be set to 4.4V.In order to comply with the constraints, the maximum output current is reduced to 1.25A.
FAN5402UCX Features
Battery pack voltage of 4.5V Max
Power Management Circuits subcategory
20-UFBGA, WLCSP package
FAN5402UCX Applications
There are a lot of ON Semiconductor FAN5402UCX Battery Chargers ICs applications.
- Automotive/electrical vehicle
- Industrial handhelds
- Trash compactors
- Charging cradle for wearable devices
- Electric pallet truck
- Wireless headphones
- Material handling
- Emergency/Security
- Automotive battery charger circuits
- Embedded automotive applications
