FCT162823ATPACTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 9 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 300pF |
| Prop. Delay@Nom-Sup | 10 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Input Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FCT162823ATPACTE4 Overview
The package is in the form of 56-TFSOP (0.240, 6.10mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74FCTseries comprises this type of FPGA. D latch consists of 2 elements. This process consumes 500μA quiescents. Terminations are 56. You can search similar parts based on 74FCT162823. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 4.5pF farads. It belongs to the family of electronic devices known as FCT. It is mounted by the way of Surface Mount. This board is designed with 56pins on it. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 9bits in its design. As soon as 5.5Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A total of 5V power supplies are needed to run it. There are 2 ports embedded in the flip flops. With a current output of 24mA , it offers maximum design flexibility. The number of input lines is 9.
FCT162823ATPACTE4 Features
Tape & Reel (TR) package
74FCT series
56 pins
9 Bits
5V power supplies
FCT162823ATPACTE4 Applications
There are a lot of Texas Instruments FCT162823ATPACTE4 Flip Flops applications.
- CMOS Process
- Count Modes
- Frequency Dividers
- Modulo – n – counter
- Instrumentation
- Data Synchronizers
- Individual Asynchronous Resets
- Memory
- Supports Live Insertion
- Control circuits
