FT231XQ-R
| Parameters | |
|---|---|
| Voltage - Supply | 3.3V~5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Bridge, USB to UART |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Interface | UART |
| Operating Supply Current | 8mA |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Supply Current-Max | 8.4mA |
| Data Rate | 12 Mbps |
| Protocol | USB |
| Standards | USB 2.0 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 123.008581mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | USBmadeEZ-UART, FT-X, X-Chip |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
FT231XQ-R Overview
There is a copy of it in the 20-WFQFN Exposed Pad package. This product is easy to carry due to its Tape & Reel (TR)-shaped packaging. Keeping the temperature at -40°C~85°C will ensure reliable operation. The 3.3V~5VV power source is all you need to use it. A 20 termination can be found in it. When the supply voltage is 5V, high efficiency can be achieved. 20 pins are used to operate the device. There are a total of MICROPROCESSOR CIRCUIT GPIOs, uCs, and peripheral ICs in this gadget. 8mA is the supply current for the gadget. Featuring copper construction, this electrical component belongs to the USBmadeEZ-UART, FT-X, X-Chip series. The power supply for the component is set to 3.3/5V. The device in Other uPs/uCs/Peripheral ICs is self-contained. There are currently 1 channels available for use. A maximum supply current of 8.4mA is required for operation.
FT231XQ-R Features
Other uPs/uCs/Peripheral ICs subcategory
FT231XQ-R Applications
There are a lot of FTDI, Future Technology Devices International Ltd FT231XQ-R Controllers Interface ICs applications.
- Desktop PCs
- Printers
- Cameras
- WiFi Extenders
- Storage, Datacenter
- Personal Digital Assistants (PDAs)
- Smart Cities
- Intelligent Instrumentation
- TVs
- Multi-Function Monitors
