HCF4027BEY
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HCF4027 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 15V |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Number of Gates | 2 |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
HCF4027BEY Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. Differentialis the output configured for it. It is configured with the trigger Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of 3V~20V. The operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a JK Type. The 4000Bseries comprises this type of FPGA. Its output frequency should not exceed 24MHz Hz. Despite external influences, it consumes 20μAof quiescent current. There have been 16 terminations. This D latch belongs to the family of HCF4027. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 5pF farads at the input. It is mounted by the way of Through Hole. It is designed with 16 pins. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. The supply voltage (Vsup) should be maintained above 3V for normal operation. If high efficiency is desired, the supply voltage should be kept at 15V. The output current of 6.8mA makes it feature maximum design flexibility. There are 2 gates in its basic building block.
HCF4027BEY Features
Tube package
4000B series
16 pins
2 gates
HCF4027BEY Applications
There are a lot of STMicroelectronics HCF4027BEY Flip Flops applications.
- Clock pulse
- Automotive
- Latch
- Guaranteed simultaneous switching noise level
- Computers
- ESD protection
- Set-reset capability
- Registers
- Safety Clamp
- Frequency division
