HEF40374BP,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 40374 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 17MHz |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 50mA 62mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 80ns @ 15V, 50pF |
| Prop. Delay@Nom-Sup | 250 ns |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 250 ns |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
HEF40374BP,652 Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Through Hole. A voltage of 3V~15Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 4000B series. In order for it to function properly, its output frequency should not exceed 17MHz. A total of 1 elements are present. The number of terminations is 20. Members of the 40374family make up this object. A voltage of 5V is used to power it. There is a FF/Latchesbase part number assigned to the RS flip flops. The supply voltage (Vsup) should be maintained above 3V for normal operation. The D flip flop has no ports embedded.
HEF40374BP,652 Features
Tube package
4000B series
HEF40374BP,652 Applications
There are a lot of NXP USA Inc. HEF40374BP,652 Flip Flops applications.
- Reduced system switching noise
- Supports Live Insertion
- Storage registers
- Buffer registers
- Cold spare funcion
- Balanced Propagation Delays
- ESD performance
- Set-reset capability
- Test & Measurement
- Frequency Dividers
