IR3624MTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | IR3624MPBF |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 9.94V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 14V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~14V |
| Max Supply Current | 15mA |
| Quiescent Current | 3mA |
| Control Features | Current Limit, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Threshold Voltage | 4.4V |
| Max Duty Cycle | 71 % |
| Duty Cycle (Max) | 71% |
| Clock Sync | No |
| Height | 939.8μm |
| Length | 2.9972mm |
| Width | 2.9972mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR3624MTRPBF Overview
Capsuled in the 10-VFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. A 4.5V~14V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. 10 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "IR3624MPBF". There are only 10 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. 4.5V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 9.94V voltage according to the test statistics. normally, the dc dc regulator's output current is 10A, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 71 % duty cycle are designed to be reliable when powered on and powered off. This Surface Mount, Through Hole makes DC switcher suitable for most prototypes and applications. Switching controllers operate at 600kHz frequencies. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 14V. A dc switching in a dormant state uses 3mA. Components may become damaged if their current exceeds 15mA.
IR3624MTRPBF Features
Transistor Driver Outputs
Current Limit, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 71 %
Frequency: 600kHz
IR3624MTRPBF Applications
There are a lot of Infineon Technologies IR3624MTRPBF DC to DC converter applications.
- Pipe bending machines
- Nuclear power plants
- Lathes
- Various precision measuring detectors
- Machining centers
- ATMs
- Constant current circuits
- Handheld GPS
- Alternators
- Planers
