ISL21440IUZ-T13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Voltage References |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Output Voltage | 1.182V |
| Output Type | TTL |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Trim/Adjustable Output | NO |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 750nA |
| Max Supply Current | 5μA |
| Propagation Delay | 200 μs |
| Quiescent Current | 750nA |
| Min Input Voltage | 2V |
| Max Input Voltage | 11V |
| Input Offset Voltage (Vos) | 3.6mV |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL21440IUZ-T13 Overview
For convenience, it is packaged in MSOP .There is a TTL output type for this comparator.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Voltage References family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This element consists of 1 elements in total.There are 8 pins on the comparator.There is a quiescent current of 750nA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current be 750nA in order to use the device normally.A supply current exceeding 5μA may result in the comparator malfunctioning.An increase in temperature over 125°C is not recommended.Temperature lower than -40°C is not suitable for the it.The maximal supply voltage of the comparator is 11V .This comparator can be supplied with a voltage as low as 2V .
ISL21440IUZ-T13 Features
TTL output capability
Employing 1 elements
Quiescent Current: 750nA
ISL21440IUZ-T13 Applications
There are a lot of Intersil (Renesas Electronics America) ISL21440IUZ-T13 linear comparators applications.
- High-Speed Sampling Circuits
- Power management
- Portable Battery Monitoring
- Consumer Medical Electronics
- Building automation
- Zero-Crossing Detectors
- Laptop Computers
- Body Control Modules
- Pulse, Squarewave, and Time Delay Generators
- Handheld Instruments
