ISL6420BIRZ-TK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFN |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Pin Count | 20, 20 |
| JESD-30 Code | S-PQCC-N20 |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 700mA |
| Frequency (Max) | 1.4MHz |
| Voltage - Output | 27.5V |
| Input Voltage (Min) | 5.6V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.4MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | BUCK |
| Max Duty Cycle | 96 % |
| Duty Cycle (Max) | 100 % |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL6420BIRZ-TK Overview
Capsuled in the QFN package, the switching controller can be used for a wide range of applications. It can switch at 1.4MHz. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . There are many different types of terminations for 20. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. The type is a particular Switching Regulator or Controllers of switching converter. This dc dc voltage regulator should be powered by a voltage of 5.6V. It should be noted that the dc to dc regulator only accepts 28V voltage as input voltage. The duty cycle of the voltage regulator dc to dc can be set to 96 % on power-up or power-down to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 12V. You should keep dc regulator at -40°C degrees or higher. There should be 85°C more than 85°C degrees Celsius in the machine. Total number of functions (s) for thare switch converters are 1. Designing voltage regulators switchings with 20, 20 pins is one of the most important aspects of the process. There is a maximum frequency of 1.4MHz that can be switched by the controller. It is ideal for switching controllers with 700mA input. When it is working normally, it outputs a value of 27.5V. Switching with 1 phases is the property of this controller.
ISL6420BIRZ-TK Features
Switching Frequency: 1.4MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
ISL6420BIRZ-TK Applications
There are a lot of Intersil (Renesas Electronics America) ISL6420BIRZ-TK DC to DC converter applications.
- Cutting machine tools
- Bending machines
- Energy management systems
- Linear guide
- Printing equipment
- Electric water heaters
- Automation technology
- Access control systems
- Various precision measuring detectors
- Flaw detection equipment
