ISL6545IRZ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~14.4V |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
ISL6545IRZ Overview
With its 10-VFDFN Exposed Pad package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~14.4V volts and has 4.5V~14.4V supply voltage. Suitable for a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 300kHz. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 10 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. This dc to dc regulator accepts only 5.5V input voltage at most.
ISL6545IRZ Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable
PULSE WIDTH MODULATION
ISL6545IRZ Applications
There are a lot of Rochester Electronics, LLC ISL6545IRZ DC to DC converter applications.
- Program control systems
- Bending machines
- Wide-range voltage regulation circuits
- Computed tomography (CT)
- Alternators
- Combined machine tools
- Emergency lighting monitoring equipment
- Digital display device
- Sink circuits
- Handheld GPS
