IXDS502D1B
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Bulk |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*502 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 25V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 500mA |
| Rise Time | 12ns |
| Fall Time (Typ) | 10 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~25V |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 3 Ω |
| High Side Driver | NO |
| Turn Off Time | 0.035 µs |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
IXDS502D1B Overview
The LED driver's packaged as a Bulk.The 6-VDFN Exposed Pad package contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -55°C~125°C TA.There are 1 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.There is a IXD*502 family of things that it belongs to.There are 6 terminations in it.It is necessary to use the 6 pins in order to operate the LED driver.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2A.High efficiency is possible when the supply voltage is set to 15V.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 6 pins.Currently, the LED driving board has a resistance of 4Ohm ohms.Vsup (maximum supply voltage) is set to 25V.A normal operation requires that the supply voltage (Vsup) remain above 4.5V.
IXDS502D1B Features
Supplied from 15V
Resistance of 4Ohm
IXDS502D1B Applications
There are a lot of IXYS IXDS502D1B Power Switches ICs applications.
- Notebook and Tablet Computers
- Mobile Communication Devices
- Wireless Modem Data Cards
- Portable GPS Device
- Storage (HDDs, SSDs)
- Set-Top Boxes
- Hot Swap
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Wireless Headsets
