KA3511DS
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 22-DIP (0.400, 10.16mm) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Base Part Number | KA3511 |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 14V~30V |
| Control Features | Dead Time Control, Enable, Frequency Control, Power Good |
| Topology | Push-Pull |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Max Frequency | 10kHz |
| Duty Cycle (Max) | 48% |
| Output Phases | 1 |
| RoHS Status | RoHS Compliant |
KA3511DS Overview
The switching controller fits in the 22-DIP (0.400, 10.16mm) package and is ideal for most applications. It is sufficient to generate 2 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. A 14V~30V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -25°C~85°C TA. The Through Hole value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Enable, Frequency Control, Power Good. Other relevant dc to dc converter ics will be returned if you search "KA3511". There are 24 pins on switching converter. According to the test statistics, DC regulator outputs 40V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 10kHz.
KA3511DS Features
Transistor Driver Outputs
Dead Time Control, Enable, Frequency Control, Power Good
KA3511DS Applications
There are a lot of ON Semiconductor KA3511DS DC to DC converter applications.
- Large fire protection systems
- Injection molding machinery
- Die casting equipment
- ATMs
- Hydraulic presses
- Medical equipment
- Serial communication converter
- Photovoltaic power
- Machining centers
- Experimental setup
