L6732TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PREVIEW (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L6732 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 14V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~14V |
| Control Features | Current Limit, Enable, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 550kHz |
| Duty Cycle (Max) | 100% |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6732TR Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tape & Reel (TR) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. 4.5V~14V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 250kHz 500kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Phase Control, Power Good, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 12V. L6732 can be used to locate other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 18V volts. You should note down the dc dc regulator's usual output current of 20A when you start a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThis dc regulatorhas a max frequency of 550kHz. Users should apply 14V to operate the voltage regulator dc to dc safely and reliably.
L6732TR Features
Transistor Driver Outputs
Switching Frequency: 250kHz 500kHz
Current Limit, Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
L6732TR Applications
There are a lot of STMicroelectronics L6732TR DC to DC converter applications.
- Pipe bending machines
- Series voltage regulation circuits
- Sensitive electronic devices
- Various CNC machine tools
- Imported equipment
- Computer application technology
- Drilling machines
- Arc suppression circuits
- Terrestrial set-top boxes
- Medical equipment
