LM158JG
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | +-1.5/+-15/3/30V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 550mW |
| Nominal Supply Current | 1mA |
| Slew Rate | 0.3 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 150nA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 700 kHz |
| Gain Bandwidth Product | 700 kHz |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 16V |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 5.08mm |
| Length | 9.6mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LM158JG Overview
There is a CDIP case package that contains the instrumentation amplifiers. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Rail/Tube case. It is estimated that there will be 8 terminations in the next few months. The pins on this board total to 8 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. The voltage gain should stay at 100dB. Using this buffer op amp requires a temperature of at least -55°C. Instrumentation amplifier should only be used at temperatures up to 125°C. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 28V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 32V. Over 3V is a recommended supply voltage for buffer ampsAs a general rule, you should conduct this electronic component under dual supply voltages of 16V volts.
LM158JG Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM158JG Applications
There are a lot of Texas Instruments LM158JG Instrumentational OP Amps applications.
- Portable docking station
- Fast A/D and D/A converters
- Automatic control
- Wireless base stations
- Tablets
- Oscilloscopes
- Video amplifiers
- Broadcasting
- Addition operation circuits
- Signal filtering
