LM25117PSQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PROGRAMMABLE OUTPUT FROM 0.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM25117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 750kHz |
| Clock Sync | No |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25117PSQ/NOPB Overview
With a 24-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The system can process Transistor Driver dc switching's outputs (s). A 4.5V~42V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~125°C TJ dc switcher. The switching controller can be switched at Up to 750kHz. dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Frequency Control, Ramp, Soft Start for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. Various 24 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 24V. In addition to "LM25117", there are other relevant dc to dc converter ics you can find. There are only 24 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. If you are starting a new project, you should note the dc dc regulator's typical output current is 3.3A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 750kHz is the maximum frequency of this dc regulators. The value of DC to DC voltage regulator is set at PROGRAMMABLE OUTPUT FROM 0.8V in order to fulfill the requirements more effectively. To run the voltage regulator dc to dc safely and reliably, users should apply 42V to the voltage regulator dc to dc. During dormancy, the dc switching uses 4.8mA.
LM25117PSQ/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 750kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
PROGRAMMABLE OUTPUT FROM 0.8V
LM25117PSQ/NOPB Applications
There are a lot of Texas Instruments LM25117PSQ/NOPB DC to DC converter applications.
- Solar power plants
- Hydraulic presses
- Lathes
- Serial communication converter
- CMM
- Computer monitoring equipment of building
- Wide-range voltage regulation circuits
- Geothermal power
- Electrical distribution systems
- Mobile phones
