LM2737MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 2MHz |
| Base Part Number | LM2737 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 2.2V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2737MTC Overview
In the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. There is a Tube solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). Voltages 4.5V~5.5V are the dc control's supply voltage and operating voltage, respectively. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 50kHz~2MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . The 14 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Search for "LM2737" to find other relevant dc to dc converter ics. Pins number 14 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. dc dc voltage regulators should have a minimum input voltage of 2.2V. A 5V voltage of DC regulator was detected in the test statistics. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. The duty cycle of the voltage regulator dc to dc can be set to 90 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controllers work at 2MHz Hz. In dormant mode, 1.5mA is used. During switching, this controller has a phase of 1.
LM2737MTC Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 2MHz
LM2737MTC Applications
There are a lot of Texas Instruments LM2737MTC DC to DC converter applications.
- Industrial controllers
- Plate bending machines
- Correction machines
- Adjustable voltage or current linear circuits
- Balance equipment
- Various CNC machine tools
- Drilling machines
- Medical equipment
- Remotely powered electric motors
- Product burn-in
