LM2901DTBR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2901DTBR2 Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) for ease of transportation.The comparator has an output type of CMOS, Open-Collector, TTL .We ship the part through Tape & Reel (TR) .14 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator has a total of 4 elements.Electronic comparator has 14 pins.A Surface Mount mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~105°C .The comparator is equipped with 14 pins.You can find more pin-to-pin solutions by searching LM2901 .A quiescent current of 2.5mA is observed in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 2mA .An excess of current supply over 2mA could result in malfunction of the comparator.A power supply of 5V is sufficient for the operation of the device.Electronic comparator is possible to input up to 250nA current into the device.From the voltage formula, the voltage gain of the part is 100dB .
LM2901DTBR2 Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~105°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901DTBR2 Applications
There are a lot of ON Semiconductor LM2901DTBR2 linear comparators applications.
- Threshold Detectors
- Wearable Devices
- Portable and Battery-Powered Systems
- Factory automation & control
- Notebooks and PDAs
- Window Comparators, Multivibrators
- Battery-Powered Electronics
- Analog front end
- Simple Analog-to-Digital Converters (ADCs)
- DC/DC and AC/DC power supplies
