LM3153MHX-3.3/NOPB
| Parameters | |
|---|---|
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3153 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | 8V~18V |
| Quiescent Current | 3.6mA |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 42V |
| Synchronous Rectifier | Yes |
| Max Frequency | 750kHz |
| Max Duty Cycle | 72 % |
LM3153MHX-3.3/NOPB Overview
With its 14-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). dc controls with 8V~18V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 14 terminations with various dc switching's functions. The nominal DC switcher's voltage input is 18V. Other relevant dc to dc converter ics will be returned if you search "LM3153". Total pins of switching converter are 14. Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 6V. Statistically, DC regulator outputs 3.3V volts. It should be noted that the dc to dc regulator only accepts 42V voltage as input voltage. In most cases, the dc dc regulator's output current is 12A. This information should be noted when you begin working with the component. A duty cycle set at 72 % ensures voltage regulator dc to dc reliability during power-on and power-off. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 750kHz. A circuit should contain 18V in order to ensure the voltage regulator dc to dc runs safely and reliably. Basically, it's a dc to dc voltage regulator from the SIMPLE SWITCHER? series. Dormant dc switchings use 3.6mA.
LM3153MHX-3.3/NOPB Features
Transistor Driver Outputs
Enable, Soft Start
Max Duty Cycle: 72 %
LM3153MHX-3.3/NOPB Applications
There are a lot of Texas Instruments LM3153MHX-3.3/NOPB DC to DC converter applications.
- Domestic water pumps
- Ball screw pair
- Hydro power
- Hydrogen power
- Packaging
- Access control systems
- Nuclear power plants
- Production lines
- Overvoltage protection circuits in TV sets
- ATMs
