LM3224MM-ADJ

Adjustable 0.65mm PMIC 8 Pin 1.25MHz MSOP

Manufacturer: Texas Instruments
Nocochips NO: 815-LM3224MM-ADJ
Package: MSOP
Datasheet: -
Stock: 111
Description: Adjustable 0.65mm PMIC 8 Pin 1.25MHz MSOP (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	MSOP
Number of Pins	8
Packaging	Cut Tape
JESD-609 Code	e0
Pbfree Code	no
Moisture Sensitivity Level (MSL)	1
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Terminal Pitch	0.65mm
Frequency	1.25MHz
Pin Count	8
Number of Outputs	1
Efficiency	90 %
Output Type	Adjustable
Max Output Current	2.45A
Input Voltage-Nom	2.7V
Temperature Grade	AUTOMOTIVE
Max Supply Voltage	7V
Min Supply Voltage	2.7V
Analog IC - Other Type	SWITCHING REGULATOR
Current - Output	2.45A
Max Output Voltage	20V
Voltage - Output	20V
Topology	Boost
Min Input Voltage	2.7V
Control Mode	CURRENT-MODE
Frequency - Switching	1.25MHz
Max Input Voltage	7V
Control Technique	PULSE WIDTH MODULATION
Min Output Voltage	7V
Height	860μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant

LM3224MM-ADJ Overview

MSOP package saves space on the board. These LED drivers have 1 outputs.As a result, it operates based on the frequency of 1.25MHz.A termination of 8 is used to operate the LED driver.The configuration of the board is built around 8 pins.There is a mounting of it by Surface Mount.Ideally, the supply voltage should be 7V.This device produces a voltage of 20V volts.There are 8 pins on this device.It operates at a voltage of 2.7V as its minimal input voltage.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.7V.Supply current is limited to 7V at its maximum value.An operating temperature above 125°C should ensure stable operation.Stable operation requires a temperature greater than -40°C.At maximum output current 2.45A, it will deliver all the benefits of a LED driver.It is important to keep the output voltage below 20V.Operation of the device requires 2.7V volts to be applied to the circuit.The interface IC that the part is equipped with is indicated by 2.45A.7V is the minimal voltage it outputs.This device has a Adjustable output type.Device employs SWITCHING REGULATOR analog IC.