LM3409QMY/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Automotive |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | LM3409 |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Max Supply Voltage | 42V |
| Min Supply Voltage | 6V |
| Output Current | 1A |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Max Input Voltage | 42V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3409QMY/NOPB Overview
To save board space, it uses the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. LED drivers design with 1 outputs.It is possible to mount the led driver using Surface Mount.DC DC Controller emerges with high efficiency and reliability.LED drivers capable of operating at -40°C~125°C TJ can be used.The benefits of Automotive are considerable.The frequency of 1MHz determines how it operates.In this case, it operates with terminations of 0.The LED light driver has a base configuration of 10 pins.A total of 1 segments are estimated.This is mounted by Surface Mount.LM3409 is the base part number for this LED driver.An acceptable maximum value for the supply voltage is 42V.In addition, it can also be categorized into Display Drivers based on its characteristics.This device requires a minimum voltage of 6V volts.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 6V.There is 42V maximum value for supply current.The device can deliver high efficiency when the maximal supply current is less than 2mA.1A is the maximum current the load can handle.Electronic components can function properly when their switching frequency is set to 2MHz.LED drivers belonging to the Automotive, AEC-Q100 series are used in a wide variety of applications.In the absence of external factors, 2mA current is consumed.This device has a voltage output of 42V volts.
LM3409QMY/NOPB Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1MHz
Supply voltage of 24V
Switching frequency of 2MHz
Output voltage of 42V
LM3409QMY/NOPB Applications
There are a lot of Texas Instruments LM3409QMY/NOPB LED Driver ICs applications.
- High-end retail lighting
- LED Lightings for Industrial Equipment
- Flicker-free LED Lighting using R1580N
- A- lamps
- Panel lighting
- Other Electronic Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Scanners and Handy Terminals
- OLED power supply for portable equipment
- Museum lighting
