LM3414SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Frequency | 500kHz |
| Base Part Number | LM3414 |
| Number of Outputs | 1 |
| Power Supplies | 24V |
| Max Supply Voltage | 42V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 3.5mA |
| Output Current | 1A |
| Max Supply Current | 3.5mA |
| Quiescent Current | 3.2mA |
| Topology | Step-Down (Buck) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 2 |
| Switching Frequency | 250kHz |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3414SD/NOPB Overview
The 8-WFDFN Exposed Pad package conserves board space. For the design of this LED driver, 1 outputs are used.To mount, use Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.-40°C~125°C TJ is the operating temperature of the led driver.Taking advantage of Automotive, Lighting has considerable benefits.A frequency of 500kHz is used to operate it.A termination of 8 is used to operate the LED driver.Its configuration is based on 8 pins.If the voltage supply is below 4.5V, undetermined failures may occur.There are estimated to be 2 segments.Surface Mount is mounted on it.The LED driver can be found under the base part number LM3414.The voltage of 42V is acceptable.Further, it can be classified as Display Drivers based on its characteristics.It achieves maximum efficiency with a minimal voltage supply of 4.5V.Its high efficiency is based on the fact that the maximal supply current should not exceed 3.5mA.There is no current that can be supplied to the load.The electronic component can function fully when the switching frequency is maintained at 250kHz.When no external factors are present, there is 3.2mA current consumption.
LM3414SD/NOPB Features
Available in the 8-WFDFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 500kHz
Supply voltage of 24V
Switching frequency of 250kHz
LM3414SD/NOPB Applications
There are a lot of Texas Instruments LM3414SD/NOPB LED Driver ICs applications.
- White LED Backlight for portable equipment
- General lighting
- High-end retail lighting
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for Tablets and Note PCs
- Refrigeration lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Constant Voltage Power Source for portable equipment
- Scanners and Handy Terminals
- Replacement lamps
