LM3535TME/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM3535 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.09mA |
| Output Current | 25mA |
| Max Supply Current | 4.38mA |
| Quiescent Current | 1.09mA |
| Voltage - Output | 2V~4V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Dimming | PWM |
| Number of Segments | 8 |
| Switching Frequency | 1.33MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3535TME/NOPB Overview
Its 20-WFBGA package is used to save board space. To mount, use Surface Mount.With high efficiency, it appears as a DC DC Regulator.It is possible for the led driver ic to operate normally at -30°C~85°C TA.The benefits of Backlight are considerable.It operates with 20 terminations.To form its configuration, 20 pins are used.If the voltage supply is below 2.7V, undetermined failures may occur.We estimate that there are 8 segments.It is mounted in the way of Surface Mount.The base part number for this LED driver is LM3535.An acceptable maximum value for the supply voltage is 5.5V.There is 2V~4V voltage output from this device.It is also classified into Display Drivers according to its characteristics.It works with the minimal supply voltage of 2.7V to meet highest efficiency standards.When the maximum supply current is below 4.38mA, it is capable of delivering high efficiency.There is no current that can be supplied to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 1.33MHz.There is no external factor that can consume current, so 1.09mA current is consumed.
LM3535TME/NOPB Features
Available in the 20-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.33MHz
LM3535TME/NOPB Applications
There are a lot of Texas Instruments LM3535TME/NOPB LED Driver ICs applications.
- Panel lighting
- General lighting
- Linear fluorescent
- Dimmable LED for vehicle interiors
- High-end retail lighting
- Down lights
- Auxiliary lights for on-vehicle cameras
- Industrial LED Lighting: Image Recognition Devices
- White LED Backlight for portable equipment
- Medical surgery lighting
