LM5022QDGSRQ1
| Parameters | |
|---|---|
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5022 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 6V~60V |
| Quiescent Current | 3.5mA |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2.24MHz |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 95 % |
| Clock Sync | Yes |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
LM5022QDGSRQ1 Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). A 6V~60V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 200kHz~2.24MHz. dc dc regulator can be generalized using Surface Mount. Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 10 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 24V nominal DC switcher's voltage input. A search for "LM5022" will reveal other relevant dc to dc converter ics. The switching converter has a total of 10 pins. It is recommended that the dc dc voltage regulator's minimum input voltage be 6V. The dc to dc regulator can only accept 60V input voltage. The maximum duty cycle of this voltage regulator dc to dc is set to 95 % to ensure reliability during power-up and power-down. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series. When the dc switching is dormant, it uses 3.5mA.
LM5022QDGSRQ1 Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2.24MHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
LM5022QDGSRQ1 Applications
There are a lot of Texas Instruments LM5022QDGSRQ1 DC to DC converter applications.
- Milling machines
- Automatic plug-in machines
- Refrigerators of central air conditioners
- Automatic testing equipment
- USB circuits
- Power supplies of electronic gadgets
- Direct power supply system
- Ball screw pair
- Gear/thread machining machines
- Servo drive system
