LM5022QDGSTQ1
| Parameters | |
|---|---|
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5022 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 6V~60V |
| Quiescent Current | 3.5mA |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2.24MHz |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 95 % |
| Clock Sync | Yes |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
LM5022QDGSTQ1 Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 6V~60V. A -40°C~125°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at 200kHz~2.24MHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Frequency Control, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. An array of 10 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 24V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "LM5022". There are a total of 10 pins on switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 6V. A maximum voltage of 60V is accepted by the dc to dc regulator as an input voltage. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 95 %. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. The dc switching utilizes 3.5mA when it is in a dormant state.
LM5022QDGSTQ1 Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2.24MHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
LM5022QDGSTQ1 Applications
There are a lot of Texas Instruments LM5022QDGSTQ1 DC to DC converter applications.
- Radio equipment
- Various precision measuring detectors
- Electrical power transmission
- Fire elevators
- Smoke exhaust equipment
- Post equipment
- Surface processing equipment
- Combined machine tools
- Motor controller circuits
- Computed tomography (CT)
