LM5025ASD/NOPB
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 650kHz |
| Base Part Number | LM5025 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4.2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~580kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Nominal Input Voltage | 13V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 80 % |
| Isolation | Non-Isolated |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 800μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
LM5025ASD/NOPB Overview
In the 16-WFDFN Exposed Pad package, the switching controller meets most application requirements. For 2 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. A total of Transistor Driver dc switching's outputs can be handled by it. A 8V~15V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~125°C TJ dc switcher. There is a switch at 200kHz~580kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Dead Time Control, Frequency Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 16 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. Other relevant dc to dc converter ics can be found by searching "LM5025". In total, switching converter has 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. According to the test statistics, DC regulator outputs 15V voltage. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. It is set to 80 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 650kHz Hz. For nominal working status, the input voltage can be set as 13V. The supply current is 4.2mA.
LM5025ASD/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~580kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 650kHz
LM5025ASD/NOPB Applications
There are a lot of Texas Instruments LM5025ASD/NOPB DC to DC converter applications.
- Printing
- Product burn-in
- Emergency lighting monitoring equipment
- Grinders
- Automatic testing equipment
- Post equipment
- Digital display device
- Remotely powered electric motors
- SMT equipment
- Constant current circuits
