LM5025CMTC/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5025 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 90V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4.2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~580kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 91 % |
| Isolation | Non-Isolated |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5025CMTC/NOPB Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 8V~15V. Worked in an dc switcher with a -40°C~125°C TJ rating. This switching controller can switch at 200kHz~580kHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. You can find other relevant dc to dc converter ics by searching "LM5025". Switching converter has a total of 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. Test statistics indicate DC regulator outputs 15V voltage. In most cases, the output current of the dc dc regulator will be 3A, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 91 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator1MHz has the maximum frequency. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 90V. With a current supply of 4.2mA, it runs.
LM5025CMTC/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~580kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 91 %
LM5025CMTC/NOPB Applications
There are a lot of Texas Instruments LM5025CMTC/NOPB DC to DC converter applications.
- Injection molding machinery
- Network technology
- Refrigerators of central air conditioners
- Sensitive electronic devices
- Milling machines
- Packaging
- Die casting equipment
- Sink circuits
- Alternators
- Radio equipment
