LM5025MTC/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | LM5025 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4.2mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Output Power | 300W |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~580kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Reference Voltage | 5V |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 80 % |
| Isolation | Non-Isolated |
| Clock Sync | Yes |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5025MTC/NOPB Overview
It comes in the 16-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 2. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) can be handled by it. 8V~15V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~125°C TJ. In this switching controller, the switch can be set to 200kHz~580kHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. LM5025 can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 16. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator must be 8V. As determined by the test statistics, the output voltage of DC regulator is 15V. It's important to remember that the dc dc regulator's normaloutput current is 10mA, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 80 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controller operates at 1MHz Hz. With a current supply of 4.2mA, it runs.
LM5025MTC/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~580kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
LM5025MTC/NOPB Applications
There are a lot of Texas Instruments LM5025MTC/NOPB DC to DC converter applications.
- Industrial robots
- Digital display device
- Post equipment
- Constant current circuits
- Telecommunications equipment
- Elevator lighting
- Communication system
- Adjustable voltage or current linear circuits
- Computer monitoring equipment of building
- Arc suppression circuits
