LM5035AMH/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Output Power | 100W |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 0 % |
| Isolation | Isolated |
| Duty Cycle | 0 % |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5035AMH/NOPB Overview
With a 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 13V~105V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~125°C TJ. The switching controller is capable of switching at the 200kHz 500kHz position. Surface Mount makes it suitable for general dc dc regulator. Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at DUAL. Different dc switching's functions can be applied to 20 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 48V. A search for "LM5035" will reveal other relevant dc to dc converter ics. The switching converter has a total of 20 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Test statistics indicate DC regulator outputs 15V voltage. The dc dc regulator's usual output current is 2A, which should be noted down when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 0 % on power-up or power-down to ensure reliability. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 1MHz is the maximum frequency of this dc regulators. With a current supply of 4mA, it runs.
LM5035AMH/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
LM5035AMH/NOPB Applications
There are a lot of Texas Instruments LM5035AMH/NOPB DC to DC converter applications.
- Energy management systems
- Smoke exhaust equipment
- Current source circuits
- Printing
- Automation technology
- Hydro power
- Automatic testing equipment
- Television equipment
- Geothermal power
- Wind power
