LM5041ASDX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5041ASDX/NOPB Overview
It comes in a 16-WFDFN Exposed Pad package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. 15V~90V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. The switching controller is capable of switching at the 200kHz 600kHz position. dc dc regulator can be generalized using Surface Mount. Dead Time Control, Frequency Control, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . Various 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 48V. Searching "LM5041" will return other relevant dc to dc converter ics. 16 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. It should be noted that the dc to dc regulator only accepts 90V voltage as input voltage. If you start a project, note down the dc dc regulator's usual output current of 1.5A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 1MHz.
LM5041ASDX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5041ASDX/NOPB Applications
There are a lot of Texas Instruments LM5041ASDX/NOPB DC to DC converter applications.
- Special machining machine tools
- Scientific testing
- Servo drive system
- Digital video recorders
- Printing
- Nuclear power plants
- Milling machines
- Terrestrial set-top boxes
- Direct power supply system
- Correction machines
