LM5041SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 9V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5041SDX/NOPB Overview
This switching controller fits most application requirements since it is packaged in a 16-WFDFN Exposed Pad package. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 15V~90V. A -40°C~125°C TJ dc switcher is not a problem. The switching controller can be switched at 200kHz 600kHz. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Dead Time Control, Frequency Control, Soft Start which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. The 16 terminations can be used for a wide range of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. Other relevant dc to dc converter ics will be returned if you search "LM5041". In total, switching converter has 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. The dc to dc regulator is limited to 90V input voltage. normally, the dc dc regulator's output current is 1.5A, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 1MHz. When running the voltage regulator dc to dc in a circuit, users should apply 9V to ensure safety and reliability.
LM5041SDX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5041SDX/NOPB Applications
There are a lot of Texas Instruments LM5041SDX/NOPB DC to DC converter applications.
- Pipe bending machines
- Various precision measuring instruments
- Communication system
- Automatic testing equipment
- Various precision measuring detectors
- PSRR circuits
- Automation technology
- CNC system
- Refrigerators of central air conditioners
- Printing equipment
