LM5088MHX-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 70V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 3.8mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 94 % |
| Clock Sync | Yes |
| Duty Cycle | 97 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5088MHX-1/NOPB Overview
In the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~75V and has a 4.5V~75V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller can be switched at 50kHz~1MHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. 16 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 48V. You can find other relevant dc to dc converter ics by searching "LM5088". Total pins of switching converter are 16. dc dc voltage regulators should have a minimum input voltage of 4.5V. Based on the test statistics, DC regulator outputs voltage 70V. In most cases, the output current of the dc dc regulator will be 10A, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 94 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator has a maximum frequency of 1MHz. When running the voltage regulator dc to dc in a circuit, users should apply 75V to ensure safety and reliability. A dc switching in a dormant state uses 3.8mA.
LM5088MHX-1/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 94 %
LM5088MHX-1/NOPB Applications
There are a lot of Texas Instruments LM5088MHX-1/NOPB DC to DC converter applications.
- Remotely powered electric motors
- Boring machines
- Die casting equipment
- Injection molding machinery
- Hydro power
- Post equipment
- ATMs
- Product burn-in
- Digital display device
- Special machining machine tools
