LM5116HJD
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-CDIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~175°C TJ |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM5116 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 80V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 80V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.6mA |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 6V~80V |
| Quiescent Current | 4.6mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 18ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 12 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Isolation | Non-Isolated |
| Height | 4.45mm |
| Length | 25.65mm |
| Width | 7.37mm |
| Thickness | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5116HJD Overview
In the 20-CDIP (0.300, 7.62mm) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's6V~80V is the supply voltage and the operating voltage of the dc control. Suitable for working in an dc switcher that has a -55°C~175°C TJ. The switching controller is capable of switching at the 200kHz 535kHz position. The Through Hole allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . Various 20 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 48V. A search for "LM5116" will reveal other relevant dc to dc converter ics. There are a total of 20 pins on switching converter. Input voltage of dc dc voltage regulator must be 6V. The test statistics indicate that DC regulator outputs a voltage of 80V. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Having a Through Hole makes DC switcher suitable for most application and prototype designs. A circuit should contain 80V in order to ensure the voltage regulator dc to dc runs safely and reliably. The dc switching utilizes 4.6mA when it is in a dormant state. With a current supply of 1.6mA, it runs.
LM5116HJD Features
Transistor Driver Outputs
Switching Frequency: 200kHz 535kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5116HJD Applications
There are a lot of Texas Instruments LM5116HJD DC to DC converter applications.
- Automatic plug-in machines
- Computer-related products
- Ball screw pair
- Game consoles
- Fire elevators
- Automation technology
- Printing
- Digital video recorders
- Program control systems
- Overvoltage protection circuits in TV sets
