LM5119PSQX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5119 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 36V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Positive |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 6mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~750kHz |
| Input Voltage (Max) | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 6ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 5 ns |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5119PSQX/NOPB Overview
Capsuled in the 32-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 2 output generation. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 5.5V~65V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. In this switching controller, the switch can be set to 50kHz~750kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Ramp, Soft Start for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at QUAD . 32 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 36V is input. Search for "LM5119" to find other relevant dc to dc converter ics. There are only 32 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 5.5V. As determined by the test statistics, the output voltage of DC regulator is 800mV. It should be noted that the dc to dc regulator only accepts 65V voltage as input voltage. In most cases, the dc dc regulator's output current is 3.3A. This information should be noted when you begin working with the component. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. This dc regulatorhas a max frequency of 530kHz. DC switchings that are dormant use 6mA. It runs on a 6mA supply current.
LM5119PSQX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~750kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5119PSQX/NOPB Applications
There are a lot of Texas Instruments LM5119PSQX/NOPB DC to DC converter applications.
- Correction machines
- Linear guide
- Analog precision reference circuits
- Boring machines
- Automatic testing equipment
- Printing
- Alternators
- Domestic water pumps
- CMM
- Driver circuits
