LM5122QMHE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5122 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 65V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~65V |
| Quiescent Current | 4mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 100V |
| Topology | Boost |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 3V |
| Max Duty Cycle | 100 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5122QMHE/NOPB Overview
Capsuled in the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. Voltages 4.5V~65V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at Up to 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 20. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. A search for "LM5122" will reveal other relevant dc to dc converter ics. In total, switching converter has 20 pins. The test statistics indicate that DC regulator outputs a voltage of 100V. You should note that the dc dc regulator's usual output current is 15A. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 65V. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series. Dormant dc switchings use 4mA. The dc switcher's maximum input voltage is 65V; users must limit it accordingly. The supply voltage must be 4.5V. Depending on the datasheet, the switching converter can output 100V volts at its peak. Lowest voltage output of the voltage controller must be greater than 3V.
LM5122QMHE/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
LM5122QMHE/NOPB Applications
There are a lot of Texas Instruments LM5122QMHE/NOPB DC to DC converter applications.
- Balance equipment
- Thermal power
- Plate bending machines
- Grinders
- Magnetohydrodynamic power
- Milling machines
- Smoke exhaust equipment
- Printing
- Die casting equipment
- Computer rooms
