LMV393IDT
| Parameters | |
|---|---|
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 120μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Natural Thermal Resistance | 125 °C/W |
| Current - Output (Typ) | 93mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMV393 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 150μA |
| Output Current | 93mA |
| Propagation Delay | 375 ns |
| Quiescent Current | 120μA |
| Supply Current-Max | 0.15mA |
| Response Time | 550 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
LMV393IDT Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open Drain is being used.As a result, it is designed with Tape & Reel (TR) package.You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.Electronic comparator can be classified as a General Purpose chip.Currently, it consists of only 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.You can find more pin-to-pin solutions by searching LMV393 .This comparator presents a quiescent current of 120μA .A Surface Mount is provided for mounting on PCBs or other boards.3/5V power supplies are enough to run the device.A maximum current of 250nA can be supplied to the device.Comparator electronics follows that the voltage gain of the part is 93.98dB .The part can be powered at a minimum current of 0.15mA .The operating supply voltage for normal operation should be 3V .
LMV393IDT Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 120μA
Voltage Gain: 93.98dB
LMV393IDT Applications
There are a lot of STMicroelectronics LMV393IDT linear comparators applications.
- Power management
- Threshold Detectors
- Automatic Test Equipment
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- General Purpose Low Voltage Applications
- Lithium ion battery monitoring
- Wearable Devices
- Infotainment and Clusters
- Zero-Crossing Detectors
