LNK6769K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 56W |
| Max Power Dissipation | 77W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Length | 10.16mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6769K Overview
In the 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad package, the ac to dc converter is embedded.It is available in Tube AC/DC power converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.120kHz~136kHz is the switching frequency.As a result, it has a total of 11 terminations.It contains 11 pins.Suitable mounting is provided by Surface Mount .This AC to DC converter belongs to the LinkSwitch?-HP family of manufacturers.You are able to read the REACH SVHC standard at: No SVHC .Input voltage for the AC to DC converter is available under 265V .Input voltages less than 85V volts can be used to operate the AC to DC inverter.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.
LNK6769K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6769K Applications
There are a lot of Power Integrations LNK6769K AC DC Converters applications.
- Home appliances
- WiFi Wireless
- Standby Power Supply
- AC-DC Output Power Conversion Applications
- Adapter/Charger for Cordless Phones
- Laptops
- Standby power supplies for VCR
- Power tools
- Appliance Power Supplies
- Power tools fast chargers with trickle and on/off
