LT1243CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~100°C TJ |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1243 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Power Dissipation | 1W |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~25V |
| Quiescent Current | 170μA |
| Control Features | Frequency Control |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 30 ns |
| Nominal Input Voltage | 15V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Duty Cycle (Max) | 96% |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1243CS8#PBF Overview
This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tube surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 8.2V~25V. Suitable for work in a 0°C~100°C TJ dc switcher. dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Frequency Control for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . The 8 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. LT1243 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 8 pins. Switching converter type is specifically Switching Regulator or Controllers. DC regulator outputs 5V voltage according to the test statistics. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. It is set to 96 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. There is 500kHz frequency setting on the switching controller. The dc switching utilizes 170μA when it is in a dormant state. It is possible to set the input voltage as 15V for nominal working statuses.
LT1243CS8#PBF Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 500kHz
LT1243CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1243CS8#PBF DC to DC converter applications.
- Constant current circuits
- Drilling machines
- Printing equipment
- Combined machine tools
- Injection molding machinery
- Experimental setup
- Product burn-in
- USB circuits
- Smart grid
- Hydrogen power
