LT1510-5IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1510 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Input Voltage-Nom | 16V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 7V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 1.5A |
| Min Input Voltage | 7V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 29V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4.5mA |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 550kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Voltage - Supply (Max) | 28V |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 20V Max |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1510-5IGN#PBF Overview
In the Tube package, you will find it.In order to make it more convenient, it has been included in the 16-SSOP (0.154, 3.90mm Width) package.In this case, the device is mounted in the way of Surface Mount.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.Analog IC BATTERY CHARGE CONTROLLER is responsible for implementing the device.In order to charge the device, it needs to receive Constant - Programmable current.There are related parts to this device according to the base part number LT1510.In total, there are 16 terminations.It is 20V Max for the battery pack.This board has 16 pins, making it very simple to construct.There are a total of 16 pins that have to be connected for the product to function correctly.The maximum supply voltage of the devices should be set at 28V.Batteries with 16V can be used to power it.Withstanding a voltage of 30V, it is a reliable piece of equipment.Having the output voltage set to 20V may result in high efficiency.It is performed with a current output of 1.5A for the output of the operation.Devices in this category are classified as Power Management Circuits.This device can work at as low a voltage as possible, such as 7V.4.5mA is set for Vsup (maximum supply voltage).There is a minimum input voltage of 7V volts.16V is the input voltage for the device.The maximum input voltage is 29V volts.It is most common to find parts with 550kHz switching frequencies.
LT1510-5IGN#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
16-SSOP (0.154, 3.90mm Width) package
LT1510-5IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1510-5IGN#PBF Battery Chargers ICs applications.
- Drone
- Pallet jacks
- Portable speaker systems
- Portable medical equipment
- Fleet management
- Trash compactors
- Embedded automotive applications
- Automotive/electrical vehicle
- Industrial handhelds
- Electronic dictionary
