LT1510CGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1510 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 16V |
| Power Supplies | 16V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Input Voltage (Min) | 7.8V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4.5mA |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 220kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Voltage - Supply (Max) | 28V |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.5A |
| Battery Pack Voltage | 20V Max |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LT1510CGN#PBF Overview
There is a version of it included in the package Tube.The package 16-SSOP (0.154, 3.90mm Width) includes a version of it.It appears that the device's mounting type is Surface Mount.This is the right thing to do: set the temperature to 0°C~70°C TA.BATTERY CHARGE CONTROLLER is the analog IC used in this device.To charge the device, you will need to supply it with Constant - Programmable of current.It is possible to find the related parts to the base part number LT1510.A total of 16 terminations can be found in it.In the case of the battery pack, it is 20V Max.In total, it has 16 pins.There is 1.5A maximum charging current listed on the device.The maximum supply voltage of the devices should be set at 28V.A battery with 0V would be enough for it to run.This device belongs to the subcategory of Power Management Circuits.There is 4.5mA voltage set in Vsup (maximum supply voltage).With respect to the power supply for the part, it is set to 16V.A 16V voltage input is present in the device.Input voltage must be at least 7.8V volts.It is most common to find parts with 220kHz switching frequencies.An input voltage of 28V is the maximum that can be applied to this device.
LT1510CGN#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
16-SSOP (0.154, 3.90mm Width) package
LT1510CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1510CGN#PBF Battery Chargers ICs applications.
- Military equipment
- GPS tracker
- Portable medical instruments
- Emergency/Security
- Boat
- Marine buoy lights
- Electric vehicles
- Conventional charge
- PDAs
- Electric boat
