LT1510IS8#TRPBF
| Parameters | |
|---|---|
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1510 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Voltage | 2.465V |
| Input Voltage-Nom | 16V |
| Power Supplies | 16V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Input Voltage (Min) | 8V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4.5mA |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 200kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Voltage - Supply (Max) | 28V |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.5A |
| Battery Pack Voltage | 20V Max |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
LT1510IS8#TRPBF Overview
It is available in the package Tape & Reel (TR).It comes as part of the 8-SOIC (0.154, 3.90mm Width) package.This device is mounted using type Surface Mount.Ideally, the temperature should be set to -40°C~85°C TA in order to ensure reliable performance.To operate the device, an analog IC called BATTERY CHARGE CONTROLLER is used.To charge the device, you will need to supply it with Constant - Programmable of current.It is possible to find the related parts to the base part number LT1510.There are 8 terminations in it.In the battery pack, the voltage is 20V Max.This board has 8 pins, making it very simple to construct.The device indicates 1.5A charging current as its maximum.There is a maximum voltage requirement for devices of 28V.A battery with 0V would be enough for it to run.Ideally, when the output voltage of the device is set to 2.465V, you will be able to achieve the highest degree of efficiency.Subcategory 0 is home to this device.It is set to 4.5mA for Vsup (maximum supply voltage).It is set to 16V when it comes to the power supply for the part.The device is 16V input voltage.It is necessary to have a 8V volt input voltage.A switching frequency of 200kHz is the maximum for the part.Voltage input is limited to 28V .
LT1510IS8#TRPBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
8-SOIC (0.154, 3.90mm Width) package
LT1510IS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1510IS8#TRPBF Battery Chargers ICs applications.
- Industrial lighting
- Electric lift car
- Mobile router
- PDAs
- Charging cradle for wearable devices
- Wireless power
- Electricity bank
- Smart power strips
- Modern LA
- Digital camera
