LT1513-2CR#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1513 |
| Pin Count | 7 |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 29V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 2A |
| Min Input Voltage | 2.4V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 30V |
| Supply Current-Max (Isup) | 5.5mA |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 580kHz |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 |
| Voltage - Supply (Max) | 25V |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 20V Max |
| Width | 8.89mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1513-2CR#TRPBF Overview
It is included in the Tape & Reel (TR) package for convenience.It is contained in a package named TO-263-8, D2Pak (7 Leads + Tab), TO-263CA.Mounting type is Surface Mount.It is recommended that the temperature be set to 0°C~125°C TJ in order to ensure reliable performance.Analog IC BATTERY CHARGE CONTROLLER is responsible for implementing the device.To charge the device, there is a requirement for Constant - Programmable current.A list of related parts can be found by searching for the base part number LT1513.There are 7 terminations in it.Battery pack voltage is 20V Max.The device has 7 pins in total.For it to work, 7 pins are required.Devices with 25V maximum supply voltages are recommended.A battery with 0V would be enough for it to run.29V supply voltage is not a problem for it.High efficiency can be achieved with a 20V output voltage.The operation is performed with an output current of 2A.Devices in this category are classified as Power Management Circuits.At a low supply voltage, such as 2.7V, it can operate to the best of its ability.During the design process, Vsup (maximum supply voltage) was set to 5.5mA.When it comes to the part's power supply, it is set to 5V.Input voltage must be at least 2.4V volts in order to function.Input voltage is 5V.Voltage input can be as low as 30V volts at its maximum.At most, the part has a switching frequency of 580kHz.
LT1513-2CR#TRPBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package
LT1513-2CR#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1513-2CR#TRPBF Battery Chargers ICs applications.
- Power tools
- Industrial
- Automotive/electrical vehicle
- Crosswalk marker lights
- Smart cameras
- Conventional charge
- Man lift
- Laptops
- Digital camera
- Military equipment
