LT1513CR#TRPBF
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1513 |
| Pin Count | 7 |
| JESD-30 Code | R-PSSO-G7 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.245V |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Input Voltage (Min) | 2.7V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 5.4A |
| Input Voltage (Max) | 25V |
| Supply Current-Max (Isup) | 5.5mA |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 580kHz |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 |
| Voltage - Supply (Max) | 25V |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 2A |
| Battery Pack Voltage | 20V Max |
| Height Seated (Max) | 4.877mm |
| Width | 8.89mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | SINGLE |
LT1513CR#TRPBF Overview
You can find it in the Tape & Reel (TR) package.The package that is included with it comes in the shape of a TO-263-8, D2Pak (7 Leads + Tab), TO-263CA.Surface Mount is the mounting type of the device.It is best to set the temperature to 0°C~125°C TJ in order to prevent the system from overheating.In order to provide its functionality, this device uses an analog IC called BATTERY CHARGE CONTROLLER.The device needs to be charged at a current of Constant - Programmable in order to function.It is possible to find the related parts to the base part number LT1513.It has 7 terminations.In the battery pack, the voltage is 20V Max.The device is equipped with a total of 7 pins.The device has a maximum charging current of 2A.In order for a device to function, it must receive a voltage of 25V.A battery with 0V would be enough for it to run.The 1.245V output voltage allows for high efficiency.This device is a member of subcategory Power Management Circuits.It is configured to be 5.5mA for Vsup (maximum supply voltage).5V is the power supply setting for the part.The device has an input voltage of 5V.It is required that the input voltage be 2.7V volts at the minimum.Parts with 580kHz switching frequencies are at most available.Input voltages up to 25V can be used with this device.
LT1513CR#TRPBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package
LT1513CR#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1513CR#TRPBF Battery Chargers ICs applications.
- Power tools
- Floor scrubber
- Portable devices
- Wireless headphones
- Battery backup applications
- Marine buoy lights
- Robot
- Embedded automotive applications
- Charging cradle for wearable devices
- Cellphones
