LT3757AEDD#PBF
| Parameters | |
|---|---|
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 2.9V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.02A |
| Frequency - Switching | 100kHz~1MHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Base Part Number | LT3757 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive and Negative |
| Voltage - Supply (Vcc/Vdd) | 2.9V~40V |
LT3757AEDD#PBF Overview
With its 10-WFDFN Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 2.9V~40V volts and has 2.9V~40V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. There is a switch at 100kHz~1MHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. Connected to a SWITCHING REGULATOR analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . A variety of 10 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 24V. You can find other relevant dc to dc converter ics by searching "LT3757". There are only 10 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 2.9V is the minimum required for the dc dc voltage regulator. DC regulator outputs 7.2V voltage according to the test statistics. Voltages 40V are the maximum that the dc to dc regulator will accept. This dc regulatorhas a max frequency of 1MHz. A maximum value of 0.02A is output for current.
LT3757AEDD#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3757AEDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3757AEDD#PBF DC to DC converter applications.
- Household control circuits
- Packaging
- Product burn-in
- Power supplies of electronic gadgets
- Window air conditioners
- Drilling machines
- Planers
- Electric heating, lighting
- Constant current circuits
- Production lines
