LT3782AEFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3782 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 72V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 6V~40V |
| Control Features | Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 154kHz~465kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 94% |
| Length | 9.7mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT3782AEFE#PBF Overview
This switching controller fits most application requirements since it is packaged in a 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package. For outputs of 2, this dc motor controller is suitable. PMIC packaging is solid with a Tube enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 6V~40V. Suitable for a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 154kHz~465kHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Reset, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 28 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 13V volts. Other relevant dc to dc converter ics can be found by searching "LT3782". Pins number 28 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator must be 6V. Test statistics indicate DC regulator outputs 72V voltage. Voltages 40V are the maximum that the dc to dc regulator will accept. A starting point for a project is to note down the dc dc regulator's usual output current, which is 4A. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at 500kHz Hz.
LT3782AEFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 154kHz~465kHz
Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
LT3782AEFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3782AEFE#PBF DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Packaging
- Surface processing equipment
- Smoke prevention equipment
- Computer application technology
- Production lines
- Current source circuits
- Industrial robots
- Computer-related products
- Hydrogen power
