Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1998 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LTC1149 |
Function |
Step-Down |
Number of Outputs |
1 |
Output Voltage |
3.3V |
Output Type |
Transistor Driver |
Max Output Current |
50mA |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
50mA |
Voltage - Supply (Vcc/Vdd) |
Up to 48V |
Control Features |
Current Limit, Enable |
Max Output Voltage |
5.2V |
Topology |
Buck |
Min Input Voltage |
-15V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
Up to 250kHz |
Max Input Voltage |
60V |
Control Technique |
CONSTANT OFF TIME |
Supply Current-Max (Isup) |
3mA |
Synchronous Rectifier |
Yes |
Min Output Voltage |
4.9V |
Switcher Configuration |
PUSH-PULL |
Max Frequency |
250kHz |
Duty Cycle (Max) |
100% |
Clock Sync |
No |
Height |
1.5mm |
Length |
10.01mm |
Width |
3.988mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LTC1149CS#PBF Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. Tube is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). Up to 48V is the supply voltage and the operating voltage of the dc control. Suitable for work in a 0°C~70°C TA dc switcher. There is a switch at Up to 250kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 16 of dc switching. Some of the control techniques used by these dc dc converter ics are CONSTANT OFF TIME. Other relevant dc to dc converter ics can be found by searching "LTC1149". In total, switching converter has 16 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. A 3.3V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 50mA. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 250kHz on this dc regulators. The maximum input voltage of this dc switcher is 60V, so users must limit the voltage accordingly. There must be a -15V supply voltage. There will be 50mA output current greater than 50mA from the dc switcher. You should not supply more current than 3mA to the controller. Datasheets indicate that the switching converter can output 5.2V volts at its maximum. At its lowest voltage, the voltage controller does not produce less than 4.9V.
LTC1149CS#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 250kHz
Current Limit, Enable
CONSTANT OFF TIME
LTC1149CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1149CS#PBF DC to DC converter applications.
- Experimental setup
- Electric heating, lighting
- Servo drive system
- Product burn-in
- Digital precision reference circuits
- Computer rooms
- Printing equipment
- Sensitive electronic devices
- Household control circuits
- Magnetohydrodynamic power