LTC1538IG-AUX#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1538 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Power on Reset, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 138kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Output Phases | 1 |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1538IG-AUX#PBF Overview
It comes in the 28-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 3.5V~30V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller is capable of switching at the Up to 400kHz position. dc dc regulator is made easier with Surface Mount. Enable, Power on Reset, Soft Start provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 28. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Other relevant dc to dc converter ics can be found by searching "LTC1538". Total pins of switching converter are 28. There is a particular type of Switching Regulator or Controllers in switching converter. An input voltage of 3.5V is the minimum required for the dc dc voltage regulator. Statistically, the DC regulator outputs 5V voltage. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. The max frequency of the pmic can reach 138kHz. A maximum value of 2A is output for current.
LTC1538IG-AUX#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Power on Reset, Soft Start
PULSE WIDTH MODULATION
LTC1538IG-AUX#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1538IG-AUX#PBF DC to DC converter applications.
- Digital display device
- Special machining machine tools
- Large fire protection systems
- Wind power
- Access control systems
- Photovoltaic power
- USB circuits
- Computer monitoring equipment of building
- Computer application technology
- Various precision measuring instruments
