LTC1625IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1625 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Max Output Current | 2A |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 3.9V~36V |
| Control Features | Enable, Soft Start |
| Max Output Voltage | 5.1V |
| Topology | Buck, Boost |
| Min Input Voltage | 3.7V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.178V |
| Max Frequency | 165kHz |
| Duty Cycle (Max) | 99% |
| Height | 1.478mm |
| Length | 4.98mm |
| Width | 3.988mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1625IGN#PBF Overview
In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 3.9V~36V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~85°C TA dc switcher. This switching controller can switch at 150kHz. The Surface Mount makes it ideal for general dc dc regulator. Enable, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 15V. Search for "LTC1625" to find other relevant dc to dc converter ics. There are 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 36V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 10A. DC regulator165kHz has the maximum frequency. The maximum input voltage of dc switcher is 36V, so users should limit their voltage accordingly. Voltage 3.7V is needed for the supply. There will be 2A current output from the dc switcher above 2A. As per its datasheet, the switching converter has a maximum output of 5.1V volts. Neither the voltage controller's lowest voltage output 1.178Vr its highest voltage output is less than 1.178V.
LTC1625IGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 150kHz
Enable, Soft Start
PULSE WIDTH MODULATION
LTC1625IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1625IGN#PBF DC to DC converter applications.
- Mobile phones
- Large fire protection systems
- Bending machines
- Hydro power
- Refrigerators of central air conditioners
- Drilling machines
- Arc suppression circuits
- Terrestrial set-top boxes
- Direct power supply system
- Computed tomography (CT)
