LTC1871IMS#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1871 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 2.5V~36V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 2.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 50kHz~1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 17ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 8 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 92% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1871IMS#TRPBF Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 2.5V~36V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. It can switch at 50kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 10 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. LTC1871 can be searched for other relevant dc to dc converter ics. In total, switching converter has 10 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. 2.5V should be the minimum input voltage for the dc dc voltage regulator. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. 1MHz is the maximum frequency of this dc regulators. The output value is set to the greatest value of 0.05A.
LTC1871IMS#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
LTC1871IMS#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1871IMS#TRPBF DC to DC converter applications.
- Drilling machines
- Various CNC machine tools
- Smoke exhaust equipment
- Terrestrial set-top boxes
- Linear guide
- Precision electronic equipment
- Sensitive electronic devices
- Experimental setup
- Medical monitoring systems
- Packaging
