LTC3703IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3703 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 9.3V~15V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 9.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 5A |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 93% |
| Length | 4.89mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3703IGN#PBF Overview
With its 16-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tube solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 9.3V~15V. Worked in an dc switcher with a -40°C~125°C TJ rating. There is a switch at 100kHz~600kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. Other relevant dc to dc converter ics will be returned if you search "LTC3703". Particularly, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 9.3V. 5A is the largest value switching converter outputs.
LTC3703IGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LTC3703IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3703IGN#PBF DC to DC converter applications.
- Large fire protection systems
- Shearing machines
- Energy management systems
- Sensitive electronic devices
- Automatic testing equipment
- Communication system
- PSRR circuits
- USB circuits
- Fire elevators
- CMM
